headstock bearings and seals ktm exc e300 exc e 300 2008 2010 KTM SX60 It has 325mm pin/pin mounting

It has 325mm pin/pin mounting points (check mounting against original as some are different) and a 40mm shroud

Honda SH 150 i DH (2017-2018)

This set of front brake pads and rear brake drum shoes have been manufactured to replace the original brake sets on a Honda CB750 for the years and models shown above

This set of brake pads will fit the front and rear brake on a Yamaha FZR250 for the years and models shown above

This set of brake pads will fit the front and rear brake on a Yamaha FZ6 for the years and models shown above

headstock bearings and seals ktm exc e300 exc e 300 2008 2010 KTM SX60 It has 325mm pin/pin mountingBrand new set of headstock steering bearings and seals to fit: KTM EXC E 300 (2008 2010). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a KTM EXC E300 for the years and models shown above. Top sized: 29mm x 50. 25mm x 15mm. Bottom sized: 29mm x 50. 25mm x 15mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. If you require